Invisible Changes, Instantly

Detected.

Invisible Changes,

Instantly Detected.

* Service-Process Chamber Monitoring

We analyze the gas composition inside plasma process chambers in real time using el's proprietary itof (TOF-MS) and ioes (OES) systems.

Anomalies are detected the moment they occur — preventing yield loss, protecting equipment, and building the data foundation for AI-driven process automation.

* WHY MONITORING

Why Real-Time Monitoring Matters

As semiconductor nodes shrink and display processes become more complex, a single gas anomaly can lead to wafer loss, equipment damage, and costly re-qualification. Real-time monitoring is no longer optional — it is essential for maintaining yield and process stability.

Processes such as plasma etching, CVD, and chamber cleaning rely on tightly controlled reactive gases including SiF₄, CF₄, NF₃, and HF. Even small concentration changes can directly impact process performance and yield.

* Why Real 01

Key Industry Drivers

Key factors driving the adoption of real-time chamber monitoring.

Shrinking Nodes
Equipment Uptime Pressure
AI Process Automation
At 3 nm and below, even trace contamination causes defect densities that destroy yield. Tighter process windows demand continuous gas-phase surveillance.
Real-time endpoint detection enables condition-based chamber cleaning, reducing unnecessary downtime by up to 30% vs. OEM schedules.
AI/ML-based process control systems require high-frequency, high-fidelity sensor data. Real-time mass spectrometry and OES are primary inputs for next-generation fault detection models.

* Why Real 02

Monitoring Technologies

itof

• Time-of-Flight MS

Simultaneously detects all gas-phase species with high mass resolution. Ideal for CVD process monitoring, precursor quantification, and multi-component etch chemistry analysis.
ioes

• Optical Emission Spectroscopy

Non-invasive plasma diagnostics via optical fiber. Monitors plasma temperature, species concentrations, and etch endpoint in real time without contacting the process gas stream.
ioes-Ad

• APD Sensor

Transmission-based optical sensing for high-sensitivity, narrow-band gas detection. Complements OES in processes where plasma emission is weak or masked by chamber geometry.

* Service Process

From Setup to Insight

From system installation to continuous insight — a seamless monitoring partnership.

STEP 01

Pre-Consultation & System Design

Confirmation of target chambers, process steps, required gas species, and integration with customer's control system.

STEP 02

On-Site Installation & Calibration

Equipment delivery, system integration onto chamber foreline or viewport, calibration against certified reference gases, and baseline measurement.

STEP 03

Continuous Real-Time Monitoring

Fully automated continuous data acquisition. Real-time alerts for anomalies, endpoint events, and out-of-spec conditions delivered to the customer's monitoring interface.

STEP 04

Data Reporting & Advisory

Periodic data review with el's application engineers. Trend analysis, process drift reporting, and chamber maintenance scheduling recommendations.

* What Sets Apart

Built For Real-Time Precision.

Proprietary monitoring technologies, proven deployment experience,
and over 20 years of gas analysis expertise deliver reliable process insights in real time.

01

Proprietary In-House Technology

el's itof and ioes systems are developed entirely in-house, with technology licensed from the Korea Institute of Machinery & Materials (KIMM). This means faster application customization, deeper technical support, and no dependency on third-party vendors.

02

Fully Automated Measurement System

itof detects all gas-phase species simultaneously in a single measurement cycle — not sequentially. This eliminates timing gaps that cause missed transient events and delivers a complete picture of chamber chemistry at every moment.

03

Field-Proven at Tier-1 Fabs

Samsung Display has received multiple deliveries of el's ioes systems (most recently in 2025) for production process monitoring. This track record at one of the world's most demanding display fabs validates system reliability and measurement accuracy.

04

20+ Years of Gas Analysis Expertise

Founded in 2004, el brings deep application knowledge in low-vacuum gas analysis across semiconductor, display, steel, and power industries. Our engineers understand not just the instruments, but the process chemistry.

* Target Industries

Trusted by Process Engineers

Supporting semiconductor and display manufacturing with real-time process intelligence.

01 ]

Semiconductor

Memory, Foundry, System Semiconductor

02 ]

Display

OLED, LCD, and Other FPD Manufacturers

03 ]

Target Processes

Etch, CVD, Chamber Cleaning, Lithography Support

04 ]

Monitoring Method

itof (TOF-MS), ioes (OES), ioes-Ad (APD)

* Technology Background

2025.01
Technology License Agreement with KIMM for transmission-based optical sensor technology — foundation for next-generation ioes-Ad series sensing products.
2025
3rd delivery of ioes OES systems to Samsung Display for real-time production process monitoring, continuing a partnership established in 2021.
2022~2024
National R&D Project — Non-CO₂ Emission Factor Development under Korea Environmental Industry & Technology Institute (KEITI) and Ministry of Environment.
2024.09
KOLAS Accreditation (No. KT1218) for GHG measurement methodology under KSI0587:2023 and ES 13501 — certified emissions quantification capability.

* Frequently Asked Question

FAQ list

How is el's monitoring system installed on existing process equipment?

el's itof and ioes systems are installed on the foreline (downstream of the process chamber) or on viewport flanges. Installation is designed to minimize process interruption and typically completed within a scheduled maintenance window.

Can the system monitor multiple chambers simultaneously?

Yes. The imerse platform combines multiple itof units to enable simultaneous multi-chamber monitoring with synchronized data streams. The number of chambers supported depends on system configuration.

What gases can the systems detect, and at what sensitivity?

itof detects all gas-phase species within the system's mass range — including organic precursors, etch by-products, and trace contaminants. Typical detection limits are in the sub-ppm range; specifics depend on the target gas and process pressure.

How does real-time monitoring data integrate with our existing process control system?

el's systems output data in standard formats compatible with common fab data infrastructure (CSV, database-ready streams). Integration requirements are confirmed during the pre-consultation phase. Custom output formats are available on request.

Is the service available for both R&D and mass production environments?

Yes. el serves both R&D teams evaluating new process chemistries and production lines requiring continuous monitoring. System configurations and service levels are tailored accordingly.

* CONTACT US

Ready To See Inside Your Process Chamber In Real Time?

From system design and installation to continuous monitoring and data analysis
— el is your long-term process monitoring partner. Contact us to discuss your chamber configuration.